How To Fix HP Printer Error 99.09.66 | Steps

HP Printer Error 99.09.66 is the kind of error that is occurring in the HP Printer. Most of the time, printer error creates a lot of complications for users. While printing in the middle of printing work, it generates a barrier in printing and wastes lots of time. The printer scanner is characterized by printing documents. Now abstract and post the files to your computer and make a xerox copy of the items with a printer’s help. HP Printer is performing best with its standard quality features. HP Printer not only gives the best quality printer, but it also provides the best print outs.

HP Printer Error 99.09.66

HP Printer Error 99.09.66 is a standard error that is likely to appear in the HP Printer. When this kind of error generates, it complicates the printer, where the work gets obstruct. We are resolving all the issues related to printer pause. If the status appears on your screen is printer pause, it cannot print your command.

This kind of printer error occurs when the hard disk memory drive is not connected accurately. You can trace the error in the printer. The HP Printer error 99.09.66 can occur due to the hard disk memory drive getting installed inappropriately. All these kinds of causes can make the HP Printer get damaged by the HP Printer error 99.09.66.

So, now you don’t have to get in trouble as this error can sort out by following up some of the easy and simple steps through which it will become convenient to move away from the printer error. Printer error is the most common issue, so you may resolve it by unplugging and restart your printer, check cables and wireless connection.

Instructions To Sort Out The HP Printer Error 99.09.66:-

There are some of the simple instructions through which you will be to sort out the error conveniently. So, the below-mentioned steps are as follow:-

Step 1:-

Firstly, Switch off the printer and then again on the printer to move out the notification. After this, you will observe the notification getting showing; you will have to examine the hard disk memory drive if it got installed appropriately or not.

Step 2:-

When you want to remove the printer error, you will require to switch off the printer and then detach all the wires from the backside of the printer.

Step 3:-

Next, you will have to decline the formatter cover towards the printer back of the products to detach.

Step 4:-

After that, you will have to open up the formatter hutch. Assure that you should raise and remove the sheet-metal door.

Step 5:-

Next, Tap the three tabs to move the fax card and then remove the fax card from the printer.

Step 6:-

You will have to unseal the clip’s hold by revolving it 90 degrees counterclockwise and then pulling it up. Assure that you will drop the memory drive towards the border of the formatter to change it. Now, put the memory driver again into the connector.

Step 7:-

Now, Operate the retaining clip and then revolves it by 90 degrees clockwise. After that, reinstall the fax card and then assure that you have to re-establishing the fax and the connector and then reinstall the sheet metal cover.

Step 8:-

Following all this procedure, slide the formatter cover back on to the printer and reconnect all the wires. Once you complete all the process, Switch On The Printer.

So, all these above steps surely help you out with “How To Fix HP Printer Error 99.09.66“.

In any case, if you face any difficulties & inconvenience while representing, don’t delay and connect with us instantly. We will help you out for sure.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *