-->

HP Printer Error 0XC18A0106 is that type of printer error that occurs in HP Printer while printing the documents. HP Printer Error 0XC18A0106 this Printer error mostly appears in HP Photosmart Printer. This printer error usually occurs due to old cartridges it leads to the printer not working. HP Printer Error 0XC18A0106 it means that the ink system has failed in your HP Printer.

HP Printer Error 0XC18A0106

The HP Printer Error 0XC18A0106 also occurs because of disturbance while installing a newly updated cartridge, so you can’t face any printer pause situation while printing. So now you have to follow the below-mentioned steps to Fix HP Printer Error 0XC18A0106 follow the solutions put sequence wise in your HP Printer.

Various methods To Fix HP Printer Error 0XC18A0106:-

Method 1:- SWITCH OFF AND ON YOUR HP PRINTER:-

SWITCH OFF AND ON YOUR HP PRINTER

• Turn off your HP Printer by usually tapping the “OK,” “Cancel,” and “Colour” Buttons.

• Now, wait for at least a few seconds and again switch on your printer by tapping the “OK,” “Cancel,” and “Colour” Buttons for one time.

• Follow the above two steps two times.

• Now, check it out if any error is showing or not.

• If the HP Printer Error 0XC18A0106 is still persisting on your printer’s LCD screen, then go ahead for solution 2.

Method 2:- Restarting your HP Printer

Restarting your HP Printer

• Firstly, Plug off the USB wires of your printer and detach the cartridges without switching off the printer.

• Now, Wait for the “Insert Cartridges” notification to appearing on the printer’s LCD screen.

• Now, Plug off the power wire of the printer and wait for atleast seconds.

• After sometime put the plug back to the power cable to the printer and switch on your printer by tapping the power button. A printer scanner can scan the documents and convert it into digital format printing.

• Tap the power button only if the printer doesn’t switch ON unthinkingly.

• At the moment, putting the cartridges in the printer and close the all-access doors that are opened.

• If you get a notification to print a calibration page, then do the procedure.

• Now, again, put all the USB wires to your printer and begin the printing procedure and give commands.

• Lastly, examine all the printing methods. If the printer error is still showing, go for the next steps.

Method 3:- Attempt the ink boot-up procedure:-

Attempt the ink boot-up procedure:

• Firstly, entrance the support Menu by tapping and grabbing the * and # both the keys simultaneously and free both tickets. The printer helps in a print out documents, scanning, and faxing.

• Then, the message “Enter Special Key Combo” must showing on display.

• If it shows tap and free the 1,2 and 3 keys in the sequence wise and after that, the display must show “Support.”

• At the moment, in the “ Support” menu, now go ahead to the “System Configuration” menu.

• Now, tap on the “Hardware Failure Status” tab.

• At present, there is a message Clearly shown on the screen. Press on the “OK” option to clear.

• At present, the Hardware Failure Status is Clearly shown on the screen tap on the cancel to further continued.

So, all these above solutions surely help you out. “ How To Fix HP Printer Error 0XC18A0106”. In any case, if you face any difficulties & inconvenience while representing, don’t delay and connect with us instantly. We will help you out for sure.

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *